This large 12 x 12 Regency Pergola will be the ultimate crown to any outdoor room. Whether you want a sanctuary for your hot tub, or a cozy sitting area, this pergola will make your outdoor haven as comfortable as your living room. The best part is that these pergolas are crafted from premium weather resistant vinyl to last a lifetime. Vinyl pergolas are superior to aluminum pergolas because aluminum will fade, pit, and rust. Vinyl will look great year after year, with virtually no maintenance.
The Regency Pergola requires a drill, level, ladder, measuring tape, 2x6's and two people to assemble. For installation on a wood deck or concrete patio, use our hassle-free Bolt Down Bracket System (sold separately). For an in-ground installation, you can extend the posts with pressure treated lumber wood inserts purchased from your local hardware store. Our detailed instructions give you all the information you need to install your pergola.
- Ready-to-assemble with simple and easy instructions
- High quality, maintenance free vinyl
- Color: White
- Assembly time: Approx 6-8 hours with 2 people
- Comes in 6 boxes
- 20-year manufacturer's warranty
- Post size: 5" x 5"
- Overall dimensions: 171.5"W x 171.5"D x 105.7"
- Weight: 235 lbs.H
- Distance between posts: 11' 2"
- Inside height: 94"H
Extra Materials You will Need
If Mounting Pergola on Concrete or Wood Deck (not intended to be installed on concrete pavers, patio stones, or interlocking bricks)
-4x4x7 Pressure-Treated Wood Posts (4) (purchase at local building center)
-4×4 Bolt Down Bracket Kit (purchase from www.newenglandarbors.com or a retailer of our products) Refer to bolt down bracket instructions for hardware requirements, as they pertain to your application.
If mounting pergola onto an existing concrete surface:
• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut From 1/2” Sheet of Plywood
• 1/4” x 2 3/4“ Cement Screws – Countersunk Head (12)
• 3/16” Concrete drill bit. Minimum 3“ long (1)
If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:
• 1/2“ x 3 1/2” x 12“ Wood Shims (32) – Can Be Cut From 1/2” Sheet of Plywood
• 1/4” x ?“ Bolts and Nuts – Countersunk Head (12) (Length depends on blocking material)
• 1/4” Washers (12)
• 1/4” Wood drill bit. Minimum 3“ long (1)
If Mounting Pergola in Ground
-4x4x10 Pressure-Treated Wood Posts (4) (purchase at local building center)
-Concrete Ready Mix (4) (purchase at local building center)
Rafter/ Beam Support (Required)
-2x6x12 Pressure-Treated Posts (8) (purchase at local building center)
