Cape Henry E-Line Stucco Lighthouse 4'

$536.95
(No reviews yet) Write a Review
SKU:
LH304E-HEN
Shipping:
$29.95 (Fixed Shipping Cost)

Out of stock

The Economy Version of the Cape Henry lighthouse... In Virginia Beach, The Cape Henry Lighthouse is still active and sits on the southern cape at the entrance to Chesapeake Bay. Each one of our yard lighthouse ornaments is meticulously handcrafted from synthetic stucco and masonry over a solid foam core making it virtually impervious to the elements. Every yard & garden lighthouse is completely hand-painted. We specialize in replicating the actual lighthouse. Our E-Line lighthouses feature plastic windows and door that you install. Each lighthouse comes with a standard light. Stucco Lighthouses typically last 8 times longer than wooden lighthouses. Each lighthouse illuminates a soft continuous light. Please allow 3-4 weeks for delivery. Please note: Lighthouses are made-to-order and cannot be returned.

  • Dimensions: 4' high x 18" diameter octagonal base
  • Approx: 38 lbs.
  • Stucco will last 8 times longer than wooden lighthouses
  • Stucco lighthouses are virtually maintenance free
  • Stucco Lighthouses are very Authentic and Realistic looking

    LIGHTHOUSE ANCHORING INSTRUCTIONS:

    WOODEN BOAT DOCK OR DECK: Screw through the wooden base of the lighthouse with galvanized screws or lag bolts into any solid wooden foundation.

    GARDEN OR YARD: Pre-drill two 3/8" pilot holes into the wooden base of the lighthouse. Dig a hole 4" deep and approximately 6-8" wider than the base diameter of your lighthouse. Mix 2 bags of Sak-Crete concrete with water (per the directions on the bag). Allow at least 24 hrs for the concrete to harden. Center the lighthouse on the concrete pad and place two pencil marks through the pilot holes of the wooden base. Remove the lighthouse and use a ½" masonry bit and drill two holes approximately 3" in depth. Embed the 3/8" anchor nuts in the concrete and attach the lighthouse using 3" galvanized lag bolts and washers.